Surface Mount Box for the Dahua VTO2202F and DHI-VTO2202F-P-S2

The DH-AC-VTM05R is the surface-mount enclosure made specifically for the Dahua VTO2202F and DHI-VTO2202F-P-S2. Door stations ship without an enclosure, so this is not an optional extra — it is the part that holds the station on the wall and keeps water out of the back of it. Surface mounting fixes the box onto the finished wall, so it can be fitted at any point — including years after the building was completed. It is the practical choice for brick, stone and any retrofit.

Key Details

• Made for one station — Dimensioned for the VTO2202F and DHI-VTO2202F-P-S2 specifically. A generic box leaves gaps around the panel edge, and every gap is somewhere water and insects get in behind the station.
• Surface installation — Surface mounting fixes the box onto the finished wall, so it can be fitted at any point — including years after the building was completed. It is the practical choice for brick, stone and any retrofit.
• Aluminium construction — Formed in aluminium, which gives the assembly rigidity and resists the knocks a panel at hand height inevitably takes.
• Finish — Silver finish, matched to the station so the completed panel looks like one piece rather than two.
• Dimensions — 141.1 × 101.6 × 48.5 mm. Measure against your aperture before cutting — a flush opening cannot be made smaller afterwards.

Where It Fits

Order alongside the VTO2202F and DHI-VTO2202F-P-S2. Decide between flush and surface before the wall is closed up: flush is neater and harder to interfere with, surface can be fitted to a finished wall at any time.

Specifications — VTM05R

Assurance

• 3-Year Australian Warranty
• Genuine Dahua stock, supplied and supported locally
• Australian-based technical support before and after purchase